How to Put Film in a Polaroid?

How to Put Film in a Polaroid?

Polaroid cameras are a fun way to snap photos and then watch them develop right in front of your eyes. However, putting the film into the camera can be a little confusing if you’ve never done it before. In this article, we will walk you through the process of inserting film into a Polaroid camera step-by-step. We’ll answer some common questions and provide helpful tips along the way! So whether you’re just starting out with Polaroids or you’re looking for a refresher course, read on for everything you need to know about how to put film in a Polaroid!

How do I insert Polaroid film into the camera?

Open the camera’s film compartment

To open the film compartment, locate the small latch on the side of the camera and slide it up. The compartment will spring open. If your camera has a button release, press the button and hold it while you slide open the compartment.

Open the camera's film compartment.

Be careful not to touch any of the exposed parts inside the compartment, as this can damage the film.[1]

Remove existing film

To start, you need to remove any existing film from your Polaroid camera. To do this, first locate the release button or lever on your camera. This is usually located on the underside of the camera body near the film compartment. Once you have found the release button, press it down and hold it while you simultaneously pull out the film cartridge. If your camera has a built-in flash, make sure that it is in the off position before continuing.

Next, take out the exposed film from the cartridge by gently pulling on the tab at the end of the roll. Once you have removed all of the exposed film, dispose of it properly. You can now proceed to inserting new film into your Polaroid camera.[1]

Load the new film cartridge into the camera

To load the new film cartridge into the camera, first make sure that the power switch is turned off. Then, open the film door by depressing the release button and swinging the door open. Next, remove the empty film pack by gently pushing it out of the camera. Take care not to touch any of the exposed surfaces of the new film pack as you insert it into the camera. Finally, close the film door and turn on the power switch.[2]

Close the camera

To load your film, you’ll need to open the camera. Start by closing it. If your camera has a power button, make sure it’s in the off position. Otherwise, just flip the camera closed.[2]


Now that you have your film loaded, it’s time to start taking pictures! Just point and shoot according to the instructions in your camera’s manual. When you’re finished, be sure to turn off your camera and store it properly until you’re ready to use it again.We hope this article was helpful in walking you through the process of how to put film in a Polaroid camera.[2]


Tips for Handling Film

Before you load your film, it’s important to know how to handle it properly. Here are some tips:

  • Be sure to keep your hands clean and free of any oils or debris.
  • Handle the film by the edges only. Avoid touching the surface of the film.
  • Don’t bend or flex the film. This can damage it and cause it to produce poor quality photos.[1]

How to Use a Polaroid Camera

Loading and Prepping

So you’ve just got your hands on a Polaroid camera. Maybe it’s brand new, maybe it’s vintage, or maybe it’s just been sitting in a closet for years gathering dust. But now that you have it, what do you do with it? How do you even start using something like this?

The first thing you need to do is load the film into the camera. Depending on the model of Polaroid camera you have, this process will be different. For example, older models might require that you open up the back of the camera and physically insert the film. Newer models might have a slot that you can insert the film into. But regardless of which type of camera you have, loading the film is always going to be the first step.

Once the film is loaded, you need to prep the camera for use. This usually involves pulling out the lens cover and making sure that the flash is turned off. Again, the specific steps will vary depending on your camera model. But once you’ve done all that, you should be ready to start taking pictures![3]

Taking a Picture

To take a picture, you will need to do the following:

  • make sure that the film is properly loaded into the camera
  • point the camera at your subject
  • press the shutter button halfway to focus the camera
  • press the shutter button all the way down to take the picture
  • for the picture to develop[3]

Taking a Picture

Improving Your Pictures

One of the great things about Polaroid cameras is that they’re very easy to use. But there are a few things you can do to make your pictures even better. Here are some tips:

  • Make sure the film is properly inserted into the camera. If it’s not inserted correctly, your pictures will be blurry.
  • Be aware of the lighting conditions when you’re taking a picture. If it’s too dark, your pictures will be dark as well. If it’s too bright, your pictures will be overexposed and won’t look as good.
  • Take some test shots before you take the actual picture you want to keep. This way, you can see how the camera is going to perform in different conditions and make sure you’re getting the results you want.[3]

Choosing a Camera

When you’re ready to take the plunge into instant photography, it’s important to choose the right camera. Not all Polaroid cameras are created equal, and there are a few things you’ll want to keep in mind when making your decision. First, think about what size pictures you want to be able to take. The original Polaroid cameras only produced small images, about two inches by three inches. If you’re interested in something a little larger, look for a “square format” camera like the Polaroid SX-70. These types of cameras produce bigger photos, typically around four inches by four inches.

Second, consider how much control you want over your final image. Some people prefer the simplicity of point-and-shoot cameras, while others like to be able to adjust the focus and exposure manually. If you fall into the latter camp, make sure to choose a camera that offers those features.

Choosing a Camera

Finally, think about how much you’re willing to spend. Polaroid cameras can range in price from around $50 to over $500, so it’s important to set a budget before you start shopping.[3]

Comparison Table: Film Installation in Different Polaroid Camera Models

Film installation is a crucial step in using a Polaroid camera to capture instant memories. With different Polaroid models available, it’s essential to understand the variations in film loading procedures. This table provides a comparison of various indicators for putting film in a Polaroid camera, helping you make the right choice for your specific camera model.

Camera Model Film Type Film Size Installation Steps Exposure Time
Polaroid OneStep 2 i-Type Film 8.8 x 10.7 cm
  1. Open the film door
  2. Insert the film cartridge
  3. Close the film door
Approx. 10-15 seconds
Polaroid 600 600 Film 10.7 x 8.8 cm
  1. Slide the film door latch to open
  2. Insert the film cartridge with dark slide facing out
  3. Close the film door
Approx. 30 seconds
Polaroid SX-70 Impossible SX-70 Film 10.7 x 8.8 cm
  1. Fold down the camera to unlock the film door
  2. Insert the film cartridge into the chamber
  3. Wait for the film ejection to start
Approx. 5-10 seconds


  • The table compares three popular Polaroid camera models: Polaroid OneStep 2, Polaroid 600, and Polaroid SX-70.
  • Each camera model uses different film types, including i-Type Film, 600 Film, and Impossible SX-70 Film.
  • Film size varies slightly between models, with dimensions ranging from 8.8 x 10.7 cm to 10.7 x 8.8 cm.
  • The installation steps differ for each camera model. Polaroid OneStep 2 and Polaroid 600 cameras require inserting the film cartridge and closing the film door. The Polaroid SX-70 model involves unfolding the camera, inserting the cartridge, and waiting for the film ejection to start.
  • The exposure time for the films ranges from approximately 5-10 seconds for the Polaroid SX-70 to 30 seconds for the Polaroid 600, depending on the model.

Understanding these variations will help you confidently load film into your specific Polaroid camera model, ensuring you’re ready to capture instant, nostalgic photographs!


How do you put film in an Instax Mini 9?

The process for loading film into an Instax Mini is pretty simple. First, make sure that the power switch is turned to the off position. Next, open up the film compartment by pressing and holding the latch release button on the back of the camera and swinging open the door.

Inside the compartment, you will see a yellow spool on one side and a white one on the other. Take care not to touch either of these as they are very delicate. To load the film, simply peel away the backing paper from a new pack of Instax Mini instant film and insert it into the empty yellow spool on top of any remaining film. Make sure that the shiny silver tab is facing downwards when you do this – if it isn’t, the film won’t be fed correctly through the camera.

Now close up the compartment door, being careful not to touch any of the exposed film. And that’s it – you’re ready to start taking instant photos!

How to put film in Instax Mini 11?

Here are some easy steps to follow when inserting your film:

  • Open the film door by pressing the latch down and pulling the door towards you. If there is already a pack of film inside, remove it before continuing.
  • Take out a new pack of Instax mini instant color film and hold it so that the silver side is facing up. You should see a yellow tab on this side.
  • With the yellow tab still facing up, insert one end of the film into the slot on the left side of the compartment. Make sure that you hear a faint click as it locks into place.
  • Gently pull out about two inches or five centimeters of film from the pack and hold it tight between your thumb and index finger.
  • Use your other hand to close the film door until you hear it click shut. Do not force it closed, or you may damage the camera.

Can you take the Polaroid film out and put it back in?

Yes, you can remove the film from the cartridge and put it back in. However, we do not recommend doing this as it may damage the film.

How do you put film in an old Polaroid camera?

It’s actually pretty easy! Just follow these simple steps and you’ll be taking instant photos in no time:

  • Open the camera back by pressing the release button.
  • Insert the film pack, making sure that the yellow arrow on the film pack is lined up with the yellow mark on the inside of the camera.
  • Close the back of the camera and make sure it snaps shut.
  • Now, just point and shoot!

If you’re having trouble getting your Polaroid camera to work, here are a few troubleshooting tips:

  • Make sure that all of the batteries are fresh and inserted correctly.
  • Check that there is no light leaks around where you’ve inserted the film. If there is, try taping it up with some black electrical tape.
  • If your photos are coming out blank, it’s possible that the film pack is expired. Try using a new pack of film and see if that makes a difference.

Why are Polaroids so expensive?

Polaroids are expensive because they use a special type of film that is not used in traditional cameras. The cost of the film and the development process are what make Polaroids more expensive than regular photographs.

One of the main reasons that Polaroids are so popular is because they offer a unique way to take pictures. The instant gratification of being able to see your picture right away is something that cannot be found with traditional photography.

If you’re looking for a fun and unique way to take pictures, then a Polaroid camera is definitely the way to go!

How many pictures can a Polaroid hold?

Polaroids can typically hold between eight and ten photos. This number may be different for older or vintage models. If you’re unsure, it’s always best to check the manual that came with your specific camera.

What type of film do I need for a Polaroid camera?

To use a Polaroid camera, you’ll need compatible instant film, commonly referred to as Polaroid film or instant film packs. Make sure to check the specific model of your Polaroid camera to find the correct film type.

How do I load film into a Polaroid camera?

Loading film into a Polaroid camera is usually a straightforward process. Open the camera back, insert the film cartridge, and ensure it is securely in place. Follow the camera’s instructions to feed the first film sheet properly, and then close the back. The camera will automatically eject the darkslide, and you’ll be ready to start taking pictures.

How many shots can I take with a Polaroid film pack?

The number of shots you can take with a Polaroid film pack varies depending on the type of pack you have. Commonly, packs contain 8, 10, or 16 film sheets. Once the pack is empty, you’ll need to replace it with a new one.

What happens if I insert the film cartridge incorrectly?

Inserting the film cartridge incorrectly can lead to issues like film jamming or not being able to take pictures properly. Always ensure you follow the camera’s instructions carefully to insert the cartridge correctly, and avoid any unnecessary damage to the film and camera.

Can I use expired Polaroid film?

While it’s possible to use expired Polaroid film, the results may not be as expected. The quality and color reproduction could be affected, and some shots might not develop correctly. For the best results, it’s recommended to use fresh, unexpired film packs.

How long does it take for a Polaroid picture to develop?

The development time for a Polaroid picture can vary depending on the film type and environmental conditions. On average, it takes around 10 to 15 minutes for the picture to fully develop, but some newer films may have shorter development times.

Can I reuse the film in a Polaroid picture?

No, Polaroid film is designed for single-use only. Once you take a picture, the film will be processed, and the image will appear. There is no way to reset or reuse the film for another shot.

Why does my Polaroid picture have a white border?

The classic Polaroid picture has a white border, which is characteristic of the brand. This border is a result of the film design and is intended to give the photo a distinctive and nostalgic look, which has been a trademark of Polaroid instant photography for decades.

Useful Video: How To Insert Film Into Your Polaroid Camera


With these steps, you should now know how to put film in a Polaroid! If you have any questions or tips of your own, be sure to leave them in the comments below. Until next time, happy shooting!

Polaroids are a great way to capture memories and moments, but they can be a little tricky to use if you’re not familiar with them. With this guide, you should now be able to insert film into your Polaroid with ease. Thanks for reading!